The DIODON HP30 is a micro-drone weighting less than 2kg adapted to defense and security missions in hostile environments.
Thanks to the maximization of operational performances, this new drone will ensure the success of your interventions.
The Diodon HP30 is a drone with inflatable arms. Not only does the inflatable limbs make it a lot easier to transport, after all, it also allows it to safely land on water, as the air-filled arms will leave it buoyant enough to float as it waits to be retrieved. They also inflate fast, allowing you to simply attach it to an air pump and be ready to fly within a couple of minutes.
The DIODON HP30’s ground control station was conceived to be easy to use with gloves and under the same constraints the drones may face.
Endurance: 180 minutes
IP level: 67
Range: 4 km
Flight Time | 30 Minutes |
Range | 4 KM |
Weight | 1,9 KG |
Size | 240 × 380 x 120 mm |
Wind-Tolerance | 25 Knots (sustained) / 29 knots (gusts) |
Operating Temperature | -10°C to +40°C |
Frequency | 2.200 – 2.290 Mhz |
Setup time | < 90 seconds |
Encryption | AES 256 |
Environmental Tolerances | All weather capable; waterproof system: – DIODON HP30 drone: equivalent IP56 – DIODON GCS Mk.2: equivalent IP67 |
Payload Capacity | 2-axis waterproof mechanically stabilised payloadEO: Direct transmission in HD quality (1280×720 pixel) IR: Direct transmission in 640×512 quality |
STANAGS | 4609 (visual_ / 4586 (control) / 4545 (interoperability data) |
With its native buoyancy and completely waterproof electronics, it is designed for use in maritime environments and during heavy rainfall.
The DIODON HP30 integrates high performance optical and thermal (IR) sensors for a better detection, reconnaissance and identification of points of interest.
The DIODON HP30’s communication systems are military-grade-encrypted and no critical data are stored on the drone